DERV Control 6000 Diesel Additive is a fuel additive for Diesel & Gas Oil's where bacterial growth is a problem

DERV Control 6000 diesel additive is to be used where diesel fuel has become contaminated with bacteria which generally happens in storage tanks, fuel tanks, bilges and fuel distribution systems. The cause of bacterial growth is usually water ingress which can happen when tanks are not sealed correctly or have holes in them etc. The water will provide an excellent growing site for bacteria which use the fuel as a feed source and multiply and form deposit which is what damages your fuel and causes blockages in your fuel pipes and filters.

Typical Symptoms of Bacterial Growth in Fuel

• Blocked fuel lines & filters
• Increased filter intervals
• Smell coming from the fuel storage tanks
• Decreasing fuel performance which will be seen as MPG drops

Chemiphase Solution to the Problem - DERV Control 6000

1. DERV Control 6000 diesel additive is a specifically selected components which will destroy all microbial growth in the fuel storage tanks within 24 hours of application.
2. A dilution rate of 500ppm will be sufficient to treat severe contamination. This equates to 1/2 litre of DERV Control per 1000 Litres of Fuel.
3. For general maintenance applications where bacterial growth is present but not actively growing a treatment rate of 250ppm will be sufficient to control the levels. This equates to 1/4 litre of DERV Control 6000 per 1000 Litres of fuel.
4. Regular fuel filter changes will still be required to remove the dead bacterial growth mass.

Application of DERV Control 6000 - Diesel Additive

DERV Control 6000 diesel additive is usually shot dosed to the system either manually or via a dosing equipment to achieve the required levels for a period of 5-6 hours. Dosing levels are dependent upon system volume and make-up rates but a general rule of thumb is 1/2 litre per 1000 Litres of fuel for heavy bacterial growth and 1/4 litre per 1000 litres for continuous dosing. To use simply drain as much water from the fuel as possible. Once this has been completed drain the tank as low as possible of fuel and shot dose DERV Control 6000 to the tank at the required dosage level. Refill the tank as normal. With 48 hours the bacteria will be neutralised and you may experience increased filter contamination as the mass of the bacteria is flushed from the system. Continue changing filters as required. If bacterial growth persists continue dosing DERV Control 6000 on a regular basis for control.

Free Shipping Information for UK Customers

Carriage to a UK Mainland address and VAT is already included in the price.  Some types of chemicals are classified as hazardous and as such will be sent on a overnight carrier.  A signature will be required on delivery.  Once your order has been placed and the product has been shipped, you will be sent an email and text message with the tracking information included which will allow you to track the item and adjust if required.